It is a rich dark java brown. You can also opt to stain the entire piece.
Open your can of gel stain.
How to gel stain furniture. Because gel stain is so much thicker than traditional wood stains its also very easy to apply. My favorite Gel Stain General Finishes Gel stain is the perfect gel stain if you are wanting a flawless finish. Wipe down the furniture with a damp rag or tack cloth to remove any sanding residue.
Sand or dust prevents the gel from adhering. I used a foam brush to apply a thick layer of the stain then used staining pads to wipe it off. See more ideas about gel stain gel stain furniture redo furniture.
If it looks like a gloopy mess thats perfect. How to Apply a Clear Coat to Gel Stain. Gel stain is particularly forgiving with splotch-prone woods like birch cherry maple and pine.
Then wipe the surface with a damp cloth to remove any dust. Once the stain is completely dry apply a gel stain top coat to lock in the color and protect the finish. To prep the surface give it a quick wipe down with a fine-grit sandpaper.
As I mentioned before I used General Finishes Gel Stain in Java. Start off by cleaning and sanding the surface. Then brush on a water-based polyurethane with a foam brush.
Do be sure to wear gloves because the stain will get all over your hands. The best thing about gel stain is that you DO NOT have to completely sand your piece of furniture before you apply your stain. The gel stain is thick like pudding not a liquid.
Sand the surface very lightly with a paper bag or very high grit sandpaper 400 and then wipe off any sanding dust with a damp rag. It took about 4 passes of wiping off the stain with a clean area on the staining pad to get all of the. Sep 29 2020 – Explore Kimberly Cunninghams board Gel Stain Furniture followed by 238 people on Pinterest.
This will help the gel stain adhere better to your cabinets. The excess gel stain should come up easily. You dont want to wipe in the same way you wipe traditional stain If you want more color apply more coats with the same process waiting about 24 hours in between.
Dont forget to wipe down the cabinets with a tack cloth to remove any sanding dust. While gel stain does go on thick and sit on the surface of the wood I found that you can still see and feel the natural wood grain beneath unlike paint. Can you thin gel stain.
Let it dry for 15 minutes. Lightly sand existing finishes Use a fine-grit sandpaper or sanding sponge to lightly sand the surface less than 1 minute for cabinet doors. You can easily apply Gel Stain with a foam Brush.
Dirt grease furniture wax or polish will interfere with the adhesion of the gel stain so a thorough cleaning is required. Its very important to stir the gel stain. This is my favorite way to use a gel stain.
It is recommended to use the gel stains in a ventilated area. Gel stain will not require you to sand the product to a raw wood finish. Then you are ready to stain.
Lightly sand the surface with 180 grit sandpaper then apply very thin coats of the gel stain allowing at least 2 hours of dry time between coats. The color of the furniture may darken temporarily from the Clean Slate. If you have gel stain that has started to get tacky before you were able to wipe it off dip a rag in mineral spirits and apply a little bit to the problem area.
Once the area has dried recoat with gel stain and wipe off within the proper timeframe. Apply liberally gently wipe away the excess. Always go with the grain with applying gel stain.
With the oak cabinets the grain was very evident post-staining. Gel stain can be used on both laminate furniture and wood veneers. Use gloves when applying because not only does the gel stain color your furniture it also colors skin.
Because Gel Stains are an oil-based product I recommend wiping down the surface with a 5050 denatured alcohol and water. These varieties tend to absorb thin traditional stains unevenly looking messy and unfinished no. How to Use Gel Stain.
See the section above on applying gel stain on finished wood for more detailed instructions. The tooth grips the gel and allows it to adhere. Using a cheap foam brush start painting the gel stain in the direction of the grain.
Open the can of gel stain and mix with a paint stirrer until you get a nice creamy consistency. Gel stains are thicker than water-based stains and they go on beautifully. Apply the gel stain with a foam brush or pad then wipe the excess away after 30 seconds.
Saturate a cleaning rag with the Clean Slate and rub over the surface of the furniture turning the side of the rag to pick up the grime. If staining kitchen cabinets degrease them with rinse-free tri-sodium phosphate. Using a stir stick thoroughly stir the stain until well blended.
So protect your hands and your clothing and any work surfaces. Be sure you dont wipe too hard to remove all the stain you just applied. Or you can substitute denatured alcohol for a 5050 Methyl Hydrate and water solution.
Let it dry and then lightly sand again.